FLINQ Smart In and Outdoor String Light Premium Bedienungsanleitung Seite 5

Manuel
EN
Notes
- Never connect several Wi-Fi String light in series!
- Make sure the Wi-Fi networks are 2.4Ghz only during setup.
- The Wi-Fi authorization method should be set as WPA2-PSK and Encryption type as
AES or set both at AUTO.
- Wireless router cannot be set as 802.11N.
- If any problems, please reset the Wi-Fi string light and set them up again from
scratch!
- For Google Assistant and Amazon Alexa; if these cannot be found, try to disable the
home skill app (for Alexa).
- If you need to fully RESET the Smart string light follow the RESET instructions in the
the FAQ.
- Do not open the Smart String light yourself.
- This Smart string light is not a TOY, Keep away from children!
- Do not exceed the total power capacity from the smart string lights with the used
appliances/devices!
- Do not use this Smart string light with extension cables
- Do not use with appliances that could cause any fire in unattended use (like irons
etc.) delete.
- This Smart string light does not have any safety disconnection by Wi-Fi. Any other use
as the intended way for this Smart string light is not validated for any warranty or
liability.
- This smart string is only used for private use.
Install and attach second string light (not included)
1. Remove all the contents from the 2nd box and switch OFF the MAIN Power and Dis-
connect the Power Adapter from the wall outlet
2. To connect the 2nd String Light to the main String Light: unscrew the cap, insert the
2nd String Light to the pins from the included Y connector of the second or main
set, and then tighten the cap. Now you connect the main String Light connector pin
to the Y connector also. Then connect the Y plug into the Power Adapter. See Main
Installation point 2. Keep all remaining parts for future (spare) use.
3. Attach the 2 String Lights at the desired location.
4. Plug the power adapter into the electrical wall outlet and follow the points in the
main installation section.
FlinQ Smart In- and Outdoor String Light Premium
Security and important safety instructions
When using electrical products, certain precautions must be followed, including the
following:
- This IP44 product is suitable for outdoor and indoor use.
- Do not install near a gas, electric radiator, fireplace, candles, or other sources with a
similar heat.
- Do not staple, nail, or hook the power cable.
- Never touch the plug contacts with sharp or metal objects.
- Do not hang the String Light only by the electric cables.
- An electric product is not a toy! To avoid the risk of fire, burns, injuries or electric
shock, the String Light should not be left within the reach of children.
- Do not use the product outside its intended use.
- Do not hang ornaments or other objects on the String light cables.
- Do not close windows and doors on the power cord so as not to damage the
insulation.
- Do not cover the product with a material (paper, cloth, etc.) that is not part of the
product when in use.
- Read and follow all instructions that are indicated on the product or supplied with it.
- Keep this manual for future reference.
Instructions for use and maintenance
- When the product is installed in or to a tree, make sure that it is installed on stable
and maintained branches.
- Before each (re)use, the product should be inspected with care. Discard all products
whose power cable has cut, damaged or frayed; whose bulbs were cracked; whose
connection boxes have been loosened; whose the copper wires are exposed.
- When disassembling, carefully remove the product from its location (trees, bushes,
etc.) to avoid any pressure on the String Light that could damage the component
elements.
- In case of non-use, store the product in a cool and dry place away from direct
sunlight.