The device must be
correctly
installed
according
to
assembly
enclosed leaflet.
A/ Before cooking
IMPORTANT:
WHEN THE APPLIANCE IS
NOT IN USE, ALWAYS
UNPLUG THE POWER
CORD
FROM
ELECTRICITY
BEFORE
FITTING
REMOVING
ATTACHMENTS
BEFORE CLEANING THE
APPLIANCE.
N.B: Before the first use
of the appliance, it's
recommended to clean
it and to make it running
idle: Clean the cooking
plate with a wet rag or
sponge, and then dry it.
Plug the appliance and
put it on during 10
minutes.
During the first uses,
appliance can release
some
smoke
odor;
it's normal and it will not
affect
appliance
functioning.
After 10 minutes, unplug
the appliance and let it
the
cool down.
manual
When the appliance is
cold, clean the cooking
plate.
-Before use, wash the
EVEN
hotplate and the grease
tray with hot water and
a mild detergent. Dry
them thoroughly.
THE
To make cleaning easier,
MAINS
cover the grease tray
OR
with tin foil to collect
SINGLE
any fats and juices.
OR
Plug the power cord into
an
socket.
Turn
knob so that the desired
temperature is aligned
with the button of the
reference
indicator light will light
up.
When the indicator light
off
switches off, this means
that
cooking
and/or
has been reached and
that the grill is ready to
use.
earthed
power
the
thermostat
point.
The
the
thermostat
the
required
temperature
The indicator light on
the thermostat shows
that the grill is heating
up and it will stay lit
until the grill reaches the
set temperature; after
this, it will switch on and
off in cycles during the
cooking
process
guarantee
that
selected temperature is
maintained.
The pre-heating time
depends on the chosen
heat setting.
The higher the selected
temperature, the higher
the
preheating
required.
B/ Cooking
Using a rubber spatula
or kitchen tongs, place
the food you want to
cook on the hotplate.
IMPORTANT: Do not use
sharp or metal objects
which will damage the
surface of the hotplate.
IMPORTANT:
using, wear oven mitts
to prevent risk of burns.
to
the
time
While