Features; Operation; Dmx Mode 3; 0-10V Operation - KAPEGO LED Dimmer 2 Bedienungsanleitung

5. Features


DMX/PWM-Converter, that can be used with any DMX512 controllers according to USITT
standard

Kapego LED Dimmer 2 can be operated with a maximum loading power of 12A/288W

Easy address setting via DIP switches

Kapego LED Dimmer 2 can be operated either in 1 or 2-channel mode

0-10V dimming interface is also included

Controls all LED fixtures with common anode (+)

PWM refresh rate of 1000Hz, suitable for TV studio standard

12 BIT DMX resolution with gamma correction for smooth dimming and colour mixing

Thermal shutdown

Strong ABS-PC housing with removable DIN Rail adapter

6. Operation

All DIP switches ON & turn on = 500 Hz
All DIP switches auf OFF & turn on = 2000 Hz
DMX Mode 1:
OUTPUT CH1 = DMX Channel 1 = 0-100% Dimmer
OUTPUT CH2 = DMX Channel 1 = 0-100% Dimmer
DMX Mode 2:
OUTPUT CH1 = DMX Channel 1 = 0-100% Dimmer
OUTPUT CH2 = DMX Channel 2 = 0-100% Dimmer

DMX Mode 3:

OUTPUT CH1 = warm white
OUTPUT CH2 = cold white
DMX Channel 1 = CCT Fadefunction (warm- / neutral- / cold white)
DMX Channel 2 = Master-Dimmer

0-10V Operation

Kapego LED dimmer 2 is able to use a 0-10V signal.
For this operation, the proper connection of GND is required.
If there is a DMX as well as a 0-10V signal, the DMX
signal has always priority treatment.

0-10V Mode A:

OUTPUT CH1 = OUTPUT CH2 = 0-100% Dimmer
0-10V Input Control

0-10V Mode B:

OUTPUT CH1 = OUTPUT CH2 = 0-100% Dimmer
0-10V Input Control
6