Operation - KAPEGO LED 350CC Bedienungsanleitung

6. Operation

DMX Control Mode
You need to switch the Dip-Switch 11 „ON".
You can adjust the DMX address with the dip-switches from 1-9.
Dip switch
A DMX value (address) add by linking the different dip switches that add up to the value you set.
e.g..: Dipswitch 1+3 = Adress 5 e.g..: Dipswitch 2+4 = Adress 1
0-10V Mode
Dip-switch 11 and 10must be „OFF" and dip-switch 12 must be „ON".
Now you can dimm all 4 Channels with a 0-10V dimmer or with the KAPEGO SC-104 and a normal
rocker switch. (KAPEGO SC-104 Art. 843338)
Manual control mode
In the manual mode you can dimm the LED devices with 2 steps, 50% brightness and 1005.
You need to switch the dip-switches from 1-8. Two switches for one channel.
Channel 1: dip-switch 1 (50% brightness), dip-switch 2 (100% brightness)
Channel 2: dip-switch 3(50% brightness), dip-switch 4(100% brightness) ...
Address
1
2
3
4
5
6
7
8
9
I e
Deko-­‐Light V ertriebs G mbH
D-­‐76307
8
1
2
4
8
16
32
64
128
256