Lumary Smart RGB String Light Startanleitung Seite 24

1. Plug and play.
2. Just insert the adapter into an appropriate power socket to turn on the
string light and
unplug it to turn off the light ,no need to install bulbs.
Buton Functions:
1. Long press 5s to enter the network configuration mode. There's a
detailed network configuration tutorial on page 3.
2. Tap the button, the mode is different each time, and the default modes
in below:
-1 Turn on
-2 Static monochromatic mode: red, green, blue
-3 Dynamic mode: breathing, flow, chase, dazzle
-4 Turn off
(Note: Long press for 5s in any mode will enter the network
configuration state)
23