Renkforce 1404184 Bedienungsanleitung Seite 3

Operating instructions
Metal monitor stand with 2 USB hubs
Item no. 1404184
Intended use
The product is intended as a base for a monitor. It features one 2-port USB hub for
data transfer and connecting devices such as a mouse or a keyboard. In addition
the product features 2 USB charging ports. Power is supplied via the included power
adapter. The product features overload and short circuit protection mechanisms.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this
product. If you use the product for purposes other than those described above, the
product may be damaged. In addition, improper use can cause hazards such as short-
circuiting, fire, electric shock etc. Read the instructions carefully and keep them for
future reference. Make this product available to third parties only together with its
operating instructions.
The product corresponds to the legal, national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
• Monitor stand with 2 USB hubs
• Micro USB cable
• Power adapter
• Operating instructions
Up-to-date Operating Instructions:
1. Open www.conrad.com/downloads in a browser or scan
the displayed QR code.
2. Select document type and language and enter the item
number into the search field. After submitting the query you
can download displayed records.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in these operating instructions, we assume no liability
for any resulting personal injury or damage to property. Such cases will
invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapors and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• Also observe the safety and operating instructions of any other devices
which are connected to the product.
• Do not overload the product. The monitor stand can support a maximum
weight of 30 kg.
• The mains outlet must be located near to the device and be easily
accessible.
• As power supply, only use the supplied mains adaptor.
• Only connect the power adaptor to a normal mains socket connected to
the public supply. Before plugging in the power adaptor, check whether
the voltage stated on the power adaptor complies with the voltage of your
electricity supplier.
• Never connect or disconnect power adaptors if your hands are wet.
• Never unplug the power adaptor from the mains socket by pulling on the
cable; always use the grips on the plug.
• When setting up the product, make sure that the cable is not pinched,
kinked or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled
in them. This poses a risk of injury.
• For safety reasons, disconnect the power adaptor from the mains socket
during storms.
• Never use the product immediately after it has been brought from a
cold room into a warm one. The condensation generated could destroy
the product. The plug-in power supply unit also involves danger to life
by electric shock! Allow the product to reach room temperature before
connecting and using it. This may take several hours.
• If the power adapter is visibly damaged, do not touch it. Risk of fatal injury
due to electric shock! First turn off the power supply to the power outlet
that the power adapter is connected to (flip off the fuse and then turn
off the residual current operated circuit breaker to disconnect the power
outlet at all phases). Now unplug the device from the power outlet. Dispose
of the power adapter in an environmentally friendly fashion, discontinue
use of it immediately. Replace it with an identical power adapter.
• Never pour liquids over electric devices and never place liquid-filled
objects near the device. If liquid or an object enters the interior of the
device nevertheless, first power down the respective socket (e.g. switch
off circuit breaker) and then pull the mains plug from the mains socket.
Do not operate the product anymore afterwards, but take it to a specialist
workshop.
• Unplug the power adapter from the mains socket while the product is not
in use.
• Never leave the product and the connected devices unattended during
use.
• Do not use force to connect USB plugs. USB plugs can be plugged into a
USB socket only one way.
• Do not short-circuit the USB outputs.
• Consult an expert when in doubt about operation, safety or connection of
the device.
• Maintenance work, adjustments and repairs may be carried out only by a
professional or at a specialist workshop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Operation
a) Positioning and powering the monitor stand
• Place the product on a stable, flat surface which can support the weight of the
product and your monitor.
• Make sure the base of your monitor does not exceed the size (length and width) of
the top of the product.
• The product is suitable for monitors of up to 61 cm (24").
• Connect the low-voltage plug of the power adapter to the DC IN 5V socket on the
rear side of the product.
• Connect the power adapter to a common household wall outlet.