Mains Supply; Areas Of Use; Setting To Work - Maltec Masterpump750W Bedienungsanleitung

 The submersible pump must be suspended from the specially provided handle or
be placed on the bottom of the shaft.
 To guarantee that the pump works properly, the bottom of the shaft must be kept
free of sludge and dirt of ail kinds.
 If the level of water sinks too far, any sludge in the shaft will dry out quickly and stop
the pump from starting up. It is necessary, therefore, to check the submersible
motor pump regularly (by carrying out start-up tests).
 The floater is adjusted in a way that the pump can immediately be started
Note!
The pump shaft should have minimum dimensions of 40 x 40 x 50 cm, so that the floating
switch can move freely.

Mains supply

Your new submersible pump is equipped with a shock-proof plug according to regulations.
The pump is designed to be connected to a 230 V 50 Hz safety socket. Make sure that is
in excellent condition.
Introduce the plug into the socket and the pump is ready to go.
If the supply cord is damaged, it must be replaced by the manufacture, its service agent or
similarly qualified person in order to avoid a hazard.
Important Note!
If the mains cable or plug suffers any damage from external action, repairs to the cable are
prohibited.
Important!
This work may only be performed by a qualified electrician

Areas of use

This pump is used primarily as cellar pump. When installed in a shaft, this pump provides
protection from flooding.
They are also used wherever water has to be moved from one place to another, e.g. in the
home, agriculture, horticulture, plumbing and many other applications.

Setting to work

After having read these instructions carefully, you can set your pump to work,
reconsidering the following items:
 Check if the pump rests on the ground of the shaft.
 Check of pressure cord has been attached properly.
 Check if electrical connection is 230 V -50 Hz.
 Check if socket is in good condition.
 Make sure that water and humidity can never come to the mains supply.
 Avoid pump running dry.
9/ 18