Safety; Safety Symbols - Elpress Blocksat Rf Benutzerhandbuch

User manual & technical documentation– Satellites Decentral – NL-GB-DE-FR-ES-RUS-CZ – Rev 1.1 - 28062017

Safety

For safety reasons, changes and
modifications to the installation are not
permitted without the written consent of
Elpress BV. The manufacturer will not be
liable for any damage arising from the
failure to obtain such consent. This also
applies to components that are used and
possibly sealed by Elpress BV.

Safety symbols

The safety conditions, regulations and
instructions described in this chapter are
to be strictly complied with at all times.
Furthermore, all local and national rules
and regulations must be observed at all
times. The following symbols are used in
this user manual:
1 2
4 5
7 8
10 11
Danger: If failure to comply exactly
with or monitor an operating or
1.
maintenance instruction can result in
danger to people and the environment.
Please follow the directions and
proceed with extreme caution.
2. Remark: This symbol is shown if an
operation, maintenance instruction or
situation requires special attention.
3. Danger from rotating parts.
4. Hazard from automatically starting
installation.
5.
Hazardous electric voltage.
6. Caustic (corrosive) substance.
7.
Safety gloves compulsory.
8. Refer to the user manual.
9. Eye protection compulsory.
10. Smoking prohibited.
11. Eating and drinking prohibited.
3
6
9
21