Mounting; Mounting The Fastening Element; Mounting The Luminaire To The Fastening Element - Waldmann Rocia.planar Rpd 1700 Gebrauchsanweisung

ENG
3.

Mounting

CAUTION
Risk of injury caused by a falling lumi-
naire.
Personal injury and material damage.
X Use only fastening elements of the
manufacturer's.
X Mount luminaire on a suitable
mounting surface.
NOTE for USA and Canada: When mount-
ing a luminaire with mains connection
(NEMA 5-15 connector), the table clamp
included in the delivery must be used.
3.1 Mounting the fastening ele-
ment
NOTE: When mounting the luminaire on
a vertical surface, a wall mounting bracket
must be used. The wall mounting bracket
can be found in Waldmann's range of acces-
sories.
Fig. 1: Fastening element
20
Fig. 2: Hole pattern.
NOTE: Observe the hole pattern, see Fig. 2.
X Screw the fastening element to the
mounting surface using four suitable
screws, see Fig. 1
3.2 Mounting the luminaire to
the fastening element
Fig. 3: Mounting the luminaire to the fasten-
ing element.
X Unscrew the screw C from the fasten-
ing element, see Fig. 3.
X Insert the stud A of the luminaire into
the opening of the fastening element.
X To secure the luminaire, screw the
screw C into the fastening element.
Mounting
A
B
C