3.5 Wiring Instructions; Operation; Directions For Use; Error Description - Mw Rollfix Pro Electric Rc Montage- Und Bedienungsanleitung

3.4 Montage Bildwand
Empfohlener Verstellbereich:
100 – 300mm vom Gehäuseende
(1)
1)
2)
3)
12
(1)
Wichtig!
(3)
(4)

3.5 Wiring instructions

Caution: Electronic wiring must be carried out by trained persons only!
Wiring diagram:
Projection
screen
with integrated
remote control
Wiring plan:
I
R
C
Servis L N PE
Power supply
PE
230V/50Hz
N
L
Servis
Caution:
the receiver of remote control is permanent under voltage, even in
stand-by mode. Therefore is recommended the product to be switched
off or reconnected when is not used for a longer time or during a storm.
This help to avoid a damage of the integrated system.
IF the non-delegable appliance is not providet with supply input and
plug or other unit for mains disconnection, which have disjunction in
all poles and whitch will quarantee the disconnection by overvoltage
III. category, must such that unit be build in the network.

Operation

4.
4.1

Directions for use

remote control
up
stop
RC
down
4.2

Error description

Problem Possible reasons
No connections to the
The motor does not work
The thermal protection has
switched off the motor
Power supply
230V/50Hz
motor
M
battery replacement
2. open up
1. push
Solutions
Connect the power
mains supply to the mains
Wait about 30 minutes until
the thermal protection
releases the motor
5