EN
1.
General safety rules
2.
Description
2.1
Product description
2.2
Technical data
2.3
Declaration of Conformity
3.
Assembly procedure
3.1
Assembly fastening
3.2
3.3
3.4
3.5
4.
4.1
4.2
2.
Description
2.1 Product description
Intended use: A projection screen Rollfix Pro Electric RC a Rollfix
Premium Electric RC are a professional screens designed and
intended for video and data projection, suitable for staterooms,
conferences, seminars, training as well as for home viewing.
2.2
Technical data
Motor: Power output 150W
Voltage
230V
Frequency
50Hz
Note: The electric motor is designed for short-time operation up to
max. 4 minutes. If this time is exceeded, the thermal protection will
switch the motor off. The motor can be used again after it cools
down, i.e. After approx. 30 minutes.
2.3
Declaration of Conformity
The manufacturer hereby declares that the product
Rollfix Pro Electric RC a Rollfix Premium Electric RC,
to which this Declaration of Conformity relates to, is in conformity
with the following EU-Standards and other Normative
Documents:
EG-Machine Directives 89/392/EWG
EMV-Directive 89/336/EWG
Low -voltage Directive 73/23/EWG
Applied norms and technical specifications:
DIN EN 292 T1+T2
DIN EN 294
DIN EN 349
DIN 19045
DIN EN 55014-part 1
DIN EN 55014-part 2
DIN EN 61000-3-2
DIN EN 60335-part 1
DIN ETS 300220
DIN ETS 300683
DIN ETS 60730
Any changes which have an effect on the technical datas in
the instruction manual or the directed use of the screen,
this means which change the screen essentially, terminate
the validity of this Declaration of Conformity.
3.
Assembly procedure
3.1
Assembly fastening
Before mounting one must test the material (wall, ceiling)
for sufficient load bearing capacity.
The selection of the plugs is dependent on the material and
the pulling-out strain.
The instructions from the plug manufacturers should be
taken note of.
2
Content:
1
2
2
2
2
2
2
3
3
4
5
5
5
5
15