Seav RTX 2251 Handbuch Seite 11

RTX 2251 – RTX 2252
GB
868 MHz radio system to be used as safety device in the automation of slid-
ing gates and rolling gates (EN 12978). It consists of one transceiver device
(Base) RTX 2251 to be connected to a motor control unit, and of one or more
battery operating transceiver devices RTX 2252 (Sensor), for the connection
of 8.2 kohm resistive and mechanical safety edges, normally found in the
gate's mobile part. System corresponding to Category 2 of EN13849-1.
i
mportant For the user
- The device must never be used by chil-
dren or persons with reduced phys-
ical-psychological
supervised or trained on the functioning
and the use modalities.
- Do not allow children to play with the
device and keep the radiocontrols away
from their reach.
- Ensure there is no-one immediately
near-by until the door is not fully open or
closed.
- ATTENTION: keep this instruction man-
ual and respect the important safety
abilities, unless
11
prescriptions contained herein. The non
compliance with the prescriptions may
cause damages and serious accidents.
- Frequently examine the plant to detect
any signs of damaging. Do not use the
device if a repair intervention is nec-
essary.
W : All operations that require the
arning
opening of the casing (cables connection,
programming, etc.) must be carried out by
expert personnel during installation. For
any further operation which requires the
casing to be re-opened (re-programming,
repair or installation amendments) contact
the after-sales assistance.
i
mportant For the installer
The RTX 2251-RTX 2252 radio system is
-
designed to help the installer to auto-