LOGICDATA LOGICflex F1 Originalanweisungen Seite 7

EN
RELEVANT SYMBOLS
Read all instructions
Indoor Use Only
BOX CONTENTS
The contents of your package are outlined in the assembly
guide provided alongside this documentation.
ASSEMBLY
Instructions for assembly are outlined in the assembly
guide provided alongside this documentation.
SAFET Y DURING ASSEMBLY
WARNING
The plastic packaging of the product is a potential suffoca-
tion hazard. Leaving children or animals unsupervised with
the empty packaging may lead to death through suffocation.
CAUTION
Contact with sharp edges may lead to minor or moderate
injury through cutting. Avoid contact with sharp edges.
NOTICE
Ensure all parts are at room temperature. Do not use a
knife or a sharp object to unpackage the product. Do not
place parts directly onto a hard floor. Use the cardboard
packaging material to cushion the impact.
AFTER ASSEMBLY: PERFORM
AN END POSITION RESET
Once assembly is completed, you may need to perform an
end position reset to be able to use the table, for exam-
ple if the table is uneven or if the table top only moves
downwards. To do this:
1. Press and hold the DOWN Key until the table stops at
the lower position limit.
2. Release the DOWN Key.
3. Press and hold the DOWN Key again. The table will
move down slightly, then up again.
4. Release the DOWN Key. The Position Reset Procedure
is complete.
WEEE Symbol
Potential for serious injury
OPERATION: YOUR HANDSET
The operation of the Table System depends on which
Handset is installed. Handsets are split into two catego-
ries: Comfort and Basic.
Basic handsets consist of 3 key elements:
1. UP Key
2. DOWN Key
3. LED Signal Light
Comfort handsets consist of 5 key elements:
1. UP Key
2. DOWN Key
3. Memory Position Keys
4. SAVE Key
5. Display
OPERATION: ALL HANDSETS
ADJUST FR AME HEIGHT
To move the Table Top UP:
Press and hold the UP Key until the desired height has
been reached.
To move the Table Top DOWN:
Press and hold the DOWN Key until the desired height
has been reached.
CE Labelling
7