JVD RB3211 Bedienungsanleitung Seite 28

 In standard mode, press and hold the "AL1-2" button for over 2 seconds, can enter the alarm time
setting mode, first set the hour of Alarm1, press the button "▲" or "▼" button to set the hour
value.
 Press the "AL1-2" button to confirm and switch to the next item. Switch to the minute setting of
alarm 1, press the button "▲" or "▼" button to set the minutes value.
 Press the "AL1-2" button to confirm and switch to the next item. Switch to the repeat setting of
alarm 1, press the button "▲" or "▼" button to set the alarm1 repeat in "M-F" or "S-S" or "M-
F" and "S-S".
 Press the "AL1-2" button to confirm and switch to the next item. Switch to the ringtone music of
alarm 1, press the "MUSIC" button to set the ringtone music for alarm 1, and press the "VOL"
button to set the maximum volume of the ringtone music for alarm 1.
 Press the "AL1-2" button to confirm and switch to the next item. Switch to the snooze time of
alarm1, press the button "▲" or "▼" button to set the snooze time value.
 Press the "AL1-2" button to confirm and switch to the next item. Switch to the hour setting of alarm
2, press the button "▲" or "▼" button to set the hours value.
 Press the "AL1-2" button to confirm and switch to the next item. Switch to the minute setting of
alarm 2, press the button "▲" or "▼" button to set the minutes value.
 Press the "AL1-2" button to confirm and switch to the next item. Switch to the repeat setting of
alarm 2, press the button "▲" or "▼" button to set the alarm1 repeat in "M-F" or "S-S" or "M-
F" and "S-S".
 Press the "AL1-2" button to confirm and switch to the next item. Switch to the ringtone music of
alarm 2, press the "MUSIC" button to set the ringtone music for alarm 1, and press the "VOL"
button to set the maximum volume of the ringtone music for alarm 1.
 Press the "AL1-2" button to confirm and switch to the next item. Switch to the snooze time of
alarm2, press the button "▲" or "▼" button to set the snooze time value.
 Press the "AL1-2" button to confirm the setting and end the setting procedure and exit the alarm
setting mode
Note:
During setup, you can press and hold the "▲" or "▼" key to speed up setting, so that the
operation can be accelerated.
The alarm is repeatedly set to M-F, the alarm function will be activated from Monday to
Friday, the Saturday and Sunday will be invalid. The alarm is repeatedly set to S-S, and the alarm
function will be activated on Saturday and Sunday, and will expire from Monday to Friday. When
the alarm is repeatedly set to display both M-F and S-S, the alarm function will be activated
throughout the week.
28