JVD RB3211 Bedienungsanleitung Seite 27

 Insert dedicated power adapter, In the same time, Open the clock battery compartment. Insert
1*3.0V CR2032 batteries and observe polarity [ "+" and "-" marks].
 The product will display all symbols and convert to time display. "0:00", the ambient temperature
of the product is displayed at the same time, at the same time, the symbol "
wireless reception flashes, and the signal of the remote wireless sensor starts to be searched (the
time is 3 minutes), When the outdoor temperature is displayed, a wireless connection is
established with the remote sensor
Manual time setting:
 Press and hold the "SET" button for over 2 seconds, enter the time mode setting, first set the
temperature unit, press the "▲" or "▼" buttons to set the temperature of the unit, the unit of
temperature can be set to "°C" or "°F",
 Press the "SET" button to confirm and switch to the next item. Switch to the hour setting. Press
the "▲" or "▼" buttons to set the hour value.
 Press the "SET" button to confirm and switch to the next item. Switch to the minute setting. Press
the "▲" or "▼" buttons to set the minute value.
 Press the "SET" button to confirm and switch to the next item. Switch to the 12/24 hour mode
display setting. Press the "▲" or "▼" buttons to set the time displayed in 12-hour or 24-hour
format
 Press the "SET" button to confirm and switch to the next item. Switch to the year setting. Press the
"▲" or "▼" buttons to set the year value.
 Press the "SET" button to confirm and switch to the next item. Switch to the month setting. Press
the "▲" or "▼" buttons to set the month value.
 Press the "SET" button to confirm and switch to the next item. Switch to the date setting. Press the
"▲" or "▼" buttons to set the date value.
 Press the "SET" button to confirm the setting and end the setting procedure and exit the time
setting mode
Note:
In time setting mode, when the value is changed, second time will automatically start from 00
seconds.
When selecting the 12Hr time format, the AM and PM logo will be displayed for the afternoon time.
Press and hold the "▲" or "▼" key to speed up setting, so the operation can be accelerated.
No button operation for more than20 seconds, it will automatically save the settings and exit the
time setting mode.
Setting the daily alarms:
 In standard mode, press "SET" button can switch display alarm1 time and alarm2 time.
" of the remote
27