Avady Propilot Salt Gebrauchsanweisung Seite 35

MESSAGE
AUTOMATIC ACTION
DISPLAYED/FAULT
DETECTED
production
IMMEDIATE
Stop of Stop of pH
regulation
Yes Yes
Yes No
No No
No Yes
Yes Yes
Yes No
CAUSE
Check that:
Insufficient water
flow through the
filtration circuit.
Loss of
communication
between the
control board and Contact a professional.
the power board
of the electronics
unit.
pH probe
incorrectly Calibrate the pH probe.
calibrated.
Series of 5
unsuccessful
attempts to
correct the pH.
Insufficient
amount of water in Check that the filtration
the filtration pump is working correctly.
circuit.
ORP measurement
beyond tolerance
for 48 hours (± 400
mV difference
compared to the
ORP setpoint).
CHECKS AND REMEDIES
the flow sensor is
connected to the
electronic unit.
the flow sensor is
the filtration circuit valves
are open.
the filter pump is working
properly.
the filtration circuit is not
blocked.
there is enough water in
the pool.
Ensure the pH corrector
container is not empty.
Perform a manual
Check the condition of the
ballast filter and injection
connector.
Check the settings in the
and
menus.
Calibrate the pH probe.
Calibrate the ORP probe.
check that the production
setting is 100%.
OPTION TO
DISABLE VIA
THE
MENU
No
No
Yes
Yes
Yes
Yes
17