RL R44676132 Handbuch Seite 7

EN
Functional description
By pressing button ①, 3 modes can be set.
Mode I:
Press the button once: Permanent orientation light with a brightness of approx. 5%.
Mode II:
Press the button twice: PIR motion sensor is activated. If there is movement in the
immediate vicinity, the light switches on to a brightness of 100% for approx. 30 - 40
seconds. As soon as there is no movement in the vicinity, the permanent orientation
light switches on with a brightness of approx. 5%.
Mode III:
Press the button 3 times: PIR - motion sensor is activated. If there is movement in the
immediate vicinity, the light switches on to a brightness of 100% for approx. 30 - 40
seconds. As soon as there is no movement in the vicinity, the light switches off
automatically.
Press the button 4 times: The light switches back to mode I.
Press and hold the button for 3 seconds to switch the light off.
Detection and brightness range of the motion detector (below 50 lux, depending on
modes and ambient conditions):
The detection range at a mounting height of 1.5 - 2.5m is max. 10m for wall luminaires.
The detection range for bollard lights is max. 6 m
The detection angle of the motion detector is 120°.
Operating options
Both pure solar operation and hybrid operation are possible with this light.
As soon as the battery falls below a specified voltage, the electronics automatically
switch to mains operation to maintain operation. The battery is charged purely via the
solar panel.
If the solar panel or the battery of the light is defective, mains operation only is possible.