Operating Instructions - Optimum Rk-0002 Bedienungsanleitung

SHREDDER OPERATION
1. Press the fasten button, hold the plastic cutter housing
and insert it into the tube inlet (when inserting please
pay attention the plastic cutter housing must be slanted
as per arrow indicated), then move the plastic cutter
housing anticlockwise until it is fastened tightly, and
release the fasten button (fig. 1).
2. Place the shredder drum into the plastic cutter housing,
then move the shredder clockwise so that it being prop-
erly fastened (fig. 2).
3. Place the pusher on the upright part of the plastic
cutter housing, and use the pusher to gently push the
vegetable into the plastic cutter housing (fig. 3).
4. Now the appliance is ready for cutting.
fine grater
coarse grater
slice grater
puree grater
SHREDDING TIPS
1. Before shredding food should be cut into small parts to
make sure it fits in the shredder. If the pieces are too big
and too much force is used, operation of the appliance is
more difficult and its efficiency is lower.
2. Use the pusher to push food against the grater. If the
pieces pushed through the feed tube are too big, they
may become stuck in the shredding chamber and be
hard to remove. In this case switch the appliance off,
remove the shredding chamber and clean it.
3. The shredder is equipped with a fine and a coarse grater
for making flakes (cheese, carrot, celeriac, boiled beet-
root, etc.). The third grater cuts vegetables into slices
(potato, cucumber, onion, etc.). The fourth grater makes
puree (potato, beetroot, fruit, etc.).
4. To change the level of shredding or the thickness of
slices apply more/less force when pushing. For example,
use little force to make thin slices.
4

OPERATING INSTRUCTIONS

SHREDDER RK-0002
5. Shredding of soft fruit and vegetables (e.g. ripe toma-
toes) is not recommended. For good shredding results
use firm and hard fruit and vegetables (for example, to
make green tomato salad).
6. Never shred fruit with hard stones, as this may damage
the appliance.
7. Never remove the shredding chamber, change graters or
push food with fingers while the shredder is on. Use a
wooden spoon to remove food from the chamber – never
do it using hands!
8. Some parts of shredded food may remain and accumu-
late in the shredding chamber or inside the grater.
Remove them after shredding food.
Maximum continuous operation: ca. 6 minutes with
shredder or ca. 10 minutes without shredder.
SHREDDER MAINTENANCE
Clean the appliance after each use:
• detach the shredding chamber and disassemble it
• wash plastic parts in warm water (up to 50
• wash graters in hot water (up to 80
• after washing the parts dry them or wipe them with
a clean cloth; assemble dry parts.
Ecology – Environmental Protection
The "crossed-out trash bin" symbol on electrical
equipment or packaging indicates that the device
cannot be treated as general household waste
and should not be disposed of into containers for such
waste.
Obsolete or broken-down electrical device should be
delivered to special designated collection points, organized
by local public administration, whose purpose is to collect
recyclable electrical equipment.
This way, each household helps reduce possible negative
effects influencing natural environment and allows the rec-
laiming of materials which the product is made of.
UK
0 C)
0
C)
e
Weight: 0.445kg