Sentiotec sound&light+ Installations- Und Gebrauchsanleitung Seite 23

Installation instructions, for professionals only p. 9/14
1. Using a jig saw or a router, for example, cut the corresponding recess
(see pages 11 & 12).
2. Provide cable guides for the connecting cable.
3. Screw the operating unit to the cabin wall using the two wood screws provided.
EN
Fig. 3 Installation of the operating unit
4. Attach the two cover panels to the operating unit. Use the two Allen set screws
and an Allen key to do so. Carefully tighten the Allen set screws.
Installing several operating units above each other:
Connect to the operating units to each other using the Allen set screws provided.
Then screw these to the cabin wall in the same position as the recess, and attach
the cover panels (see Fig. 4).