Seecode Slim Design Handbuch Seite 7

Before using for the first time:
Check the contents for completeness and visible damage. Report any
incomplete
or damaged delivery to the supplier immediately. Keep the original packaging
during the warranty or guarantee period so that you can send the Aroma Tea
Filter properly packaged in the event of a warranty or guarantee claim.
Operation
You can easily adjust the light color and brightness of the light to suit diffe-
rent room environments and your individual requirements.
The Slim Design table lamp has a touch switch on the lamp base that can
be used to switch the light on and off, select the light color and operate the
infinitely variable dimmer.
The first touch switches on the warm light color, the second touch switches
on the cooler light color and the third touch switches on the neutral light
color. Another touch of the touch switch switches the lamp off again.
Touching the touch switch for a longer time dims the light up or down.
Using the rechargeable battery
Please charge the battery of the Slim Design table lamp for at least 5 hours
before using it for the first time.
The Slim Design table lamp has an induction charging base on which the
lamp is placed and charged. A magnet holds the Slim Design table lamp and
the charging base together.
There is a charging cable on the charging base with a USB connection at the
other end of the cable. Connect this to a power adapter adapter 5V/2A (not
included).
The Slim Design table lamp can also be charged directly on the lamp base
using a USB-C cable (not included). To do this, connect the cable to the
USB-C output of the lamp base and a power adapter (not included).
Please do not use power adapters with an output voltage of more than 5
volts to charge the battery! If the voltage is too high, this can damage the
charging cable and cause a fire hazard.
During the charging process, a red LED lamp lights up at the base of the
Slim Design table lamp; when the battery is charged, the LED lamp lights up
green. The charging time is 8 to 10 hours, depending on the battery charge.
The Slim Design table lamp can also be switched on during the charging
process. However, we do not recommend permanent use on the permanent-
ly connected charging base, as this can damage the battery.