Emdr-10 With Contactor; Alarm Output - Raychem EMDR-10 Handbuch

5.2 EMDR-10 with contactor

Attention: circuit breaker for EMDR-10 max. 10A
L1
L2
L3
N
PE
*
30mA
Heating cable
* Circuit breaker according to maximum heating cable length (see item 2.5)

5.3 alarm Output

L
N
PE
Connection of an alarm lamp
(diagram) or horn (rest position)
Notice: The alarm relay is always active (switched on) as long as there is no fault.
The alarm relay is potentialfree but not suitable for the switching of safety low voltage (SELV) as
there is no double insulation in the device.
12
Contacter
Alarm
lamp
EMDR-10
DC
AC
current loop
Connection of a current
loop (rest position)
Temperature
sensor