Primera PoINT Publisher Erste Schritte, Anleitung Seite 9

PoINT Publisher: Getting Started
It displays the current settings. The layout of the dialogue may vary
depending on the functionality of your specific hardware. For exam
ple, some loaders do not use a serial port, others don't provide printing
support.
First you should define port and printer driver. Then you may specify
your drives. To do that, select the number of groups (if applicable),
click on the exact position of the drive (if applicable), and click on the
'Add' button and select a drive from the opening list. Please note that
"PoINT Publisher" needs to know the exact position of drives in some
loaders.
Finally confirm your choice by clicking on 'OK'. This will return to
the 'Settings' dialogue which shows the configured drives. The 'Test'
button should now finally be pressed to check the current settings.
The tests include checking the serial port, the communication with
the loader, and the existence of the selected drives(s). During the tests
a disc will be loaded to and unloaded from all configured drives. This
test must complete without errors. Otherwise "PoINT Publisher" will
not work properly.
9