XBOX Hard Drive Transfer Kit Handbuch Seite 5

To transfer content from your 20-GB
hard drive to your 120-GB hard drive:
turn off both of your consoles and
1
remove the 120-gb hard drive
from your Xbox 360 elite console
as described in the Xbox 360
Setup manual (volume 1).
attach your 20-gb hard drive to
2
your Xbox 360 elite console, then
disconnect all accessories from
the console's controller ports.
connect and turn on a controller,
3
which you'll need during content
transfer.
connect one end of the transfer
4
cable to your 120-gb hard drive.
connect the other end of the
5
transfer cable to the rear uSb
port of your Xbox 360 elite
console.

iMPOrTanT
be sure to connect the transfer cable
to the back port, not a port on the
front of the console.
insert the included Hard drive
6
transfer disc and follow the on-
screen instructions.
to begin using your 120-gb hard
drive after content transfer is
complete, remove your 20-gb
hard drive from your elite console
and attach your 120-gb hard drive
as instructed in the Xbox 360
Setup manual (volume 1).
5