Hama PR-5120 Bedienungsanleitung Seite 7

6. Audio source selection
6.1 AUX playback
• Press the AUX button on the remote control or press
the MODE button on the subwoofer several times to
select the AUX connection as the audio source. The
AUX selection is shown on the subwoofer's display
and signalled by an "AUX" speech message.
6.2 Playback using Bluetooth
• Press the DVD/BT button on the remote control or
press the MODE button on the subwoofer several
times to select Bluetooth
BLUE selection is shown on the subwoofer's display
and signalled by a "Bluetooth" speech message.
6.3 DVD playback
• Press the DVD/BT button on the remote control
or press the MODE button on the subwoofer
several times to select the DVD connection as the
audio source. The DVD selection is shown on the
subwoofer's display and signalled by an "DVD"
speech message.
6.4 USB/SD playback
• Insert a USB memory stick or SD/SDHC card into the
device.
• Press the USB/SD button on the remote control or
press the MODE button on the subwoofer several
times to select USB/SD as the audio source. The USB/
SD selection is shown on the subwoofer's display and
signalled by an "USB" speech message.
6.5 FM radio playback
• Press the FM button on the remote control or press
the MODE button on the subwoofer several times to
select the built-in FM radio as the audio source. The
FM selection is shown on the subwoofer's display and
signalled by an "FM" speech message.
®
as the audio source. The
®
7. Advanced features
7.1 General and individual volume control
• Press VOL+ or VOL- to increase or decrease the
volume of all speakers together.
• Press the selection buttons SURR, SUB, CEN,
FRONT and finally VOL+ oder VOL- to increase
or decrease the volume individually for a selected
speaker in the system. This can be used to improve
sound quality if there is unbalanced volume and
problematic spatial conditions.
• The volume of each individual speaker is shown in the
display.
7.2 Bluetooth first connection (pairing)
®
• Make sure that your Bluetooth
device is on and Bluetooth
• Make sure that the speaker is located within the
Bluetooth
range of max. 10 metres.
®
• Open the Bluetooth
®
and wait until "PR-5120" appears in the list of
Bluetooth
devices found.
®
• Select "PR-5120" and wait until the speaker is listed
as connected in the Bluetooth
terminal device.
• If the Bluetooth
has connected successfully BLUE will
®
be shown on the display.
Note
• Check whether your mobile device (MP3 player,
mobile phone, etc.) is Bluetooth
• If not, you can only use the speaker for playback
using the included audio cable.
• Note that the maximum range for Bluetooth
10 metres without obstacles such as walls, people,
etc.
7.3 Manual FM radio station search
• You can search for stations manually by briefly
pressing the TUN+ or the TUN- buttons on the
remote control or the
subwoofer's display.
• If you press and hold the TUN+ / TUN- buttons or the
Play/Pause button on the remote control (about 2
||
seconds), or the press and hold the
buttons on the subwoofer's display the device will
automatically search for the next receivable station
within the regional FM transmission area.
-capable terminal
®
is activated.
®
settings on your terminal device
settings on your
®
capable.
®
buttons on the
| |
|
is
®
/
| ||
5