Diesel JS15 Handbuch Seite 7

Chronograph
DATE SETTING
1. Pull crown out to position 2.
2. Rotate clockwise to set date.
3. Return crown back to position 1.
TIME SETTING
1. Before setting the time, make sure the
chronograph is stopped and set to zero
(12:00) position.
2. Pull crown out to position 3.
3. Rotate crown clockwise to set time.
4. Return crown to position 1.
CHRONOGRAPH
1. Press A to start/stop the chronograph.
2. Press B to reset to zero.
SPLIT TIME
1. Press B while the chronograph is running.
2. Press B again to return to the chronograph.
3. Press A to finalize timing.
4. Press B to reset.
CHRONOGRAPH ZERO RESET
1. If either of the chronograph hands is not at the zero (12:00) position, pull crown out to position 3.
2. Press A to rotate hands clockwise; press B to rotate hands counter-clockwise.
3. Each press of A or B will move the chronograph hands by one increment/decrement.
Press and hold A or B for fast increment/decrement.
4. When both hands are in the zero position, reset time and return crown to position 1.
8
VD53, VD53B, VR32A25
MINUTE HAND
SECOND HAND
A
24-HOUR
HAND
B