Auxiliary Input; Maintenance; Replace The Head Needle - Create Record Player Pro Benutzerhandbuch

1. Turn on the turntable with the power knob.
2. Using a 3.5mm stereo cable, connect the external audio
device to the AUX IN jack on the back of the device.
3. Use the power wheel to adjust the music volume or use the external audio device control-
lers to control the playback/volume functions.
• It is recommended that you clean your vinyl records with an anti-static cloth for maximum
enjoyment and longevity.
• For maximum durability, your stylus should be replaced periodically (approximately every
250 hours).
• Remove dust from the stylus occasionally using a very soft brush dipped in alcohol, brush-
ing from the back of the cartridge to the front.
In addition to deterioration in sound quality, vinyl records may also suffer damage as the
tip of the stylus wears out. It is recommended to change this needle every 3 or 4 months of
continuous use of the turntable. These needles are easily found in specialized stores and
websites.
Note: Before changing the needle, be sure to disconnect the
product from the power outlet.
1. Release the turntable arm head lock.
2. Lift the turntable arm up and, to remove the needle, hold the
turntable head firmly.
3. Pull out the front of the needle in a forward and downward
motion.
4. Install the new replacement needle the same way you re-
moved the old one. Raise the needle until you hear a click.
Make sure the stylus is securely installed and there is no gap between the new stylus and
the turntable arm head.

AUXILIARY INPUT

MAINTENANCE

REPLACE THE HEAD NEEDLE

E NGLI SH
9