Functioning; Bluetooth Settings; Adapter 45 Rpm - Create Record Player Pro Benutzerhandbuch

1. Plug the power cord of the turntable into the electrical outlet.
2. Place the vinyl record of your choice on the turntable.
3. Set the speed you want for your vinyl record playback using the speed selection switch.
You can choose between 33, 45 and 78 RPM.
4. Turn on the turntable with the power knob, note that this also controls the volume. After-
wards a beep will sound, this means that the turntable is in Bluetooth mode on.
5. Release the lock of the turntable arm holder, lift the arm slightly with your hand, and place
the needle head vertically over the first track of the record, the turntable will start rotating
automatically. The turntable will switch to vinyl mode and Bluetooth mode will be disa-
bled. Once the arm of the turntable is placed on the vinyl, it will begin to play the music
on the vinyl.
6. When a recording reaches the end, the turntable will stop automatically.
7. Lift the arm of the turntable and put it back on the armrest, the turntable will switch back
to Bluetooth on mode.
8. Replace the turntable arm support lock.
9. Turn off the turntable with the power switch and disconnect from the mains power supply.
1. Connect your device's Bluetooth, search "RECORD PLAYER PRO" and link the turntable to
your device.
2. A beep will sound to confirm that the device has been connected correctly.
3. Through the APP you can play or pause the turntable and switch between songs.
4. To deactivate the device and stop Bluetooth, simply remove the turntable arm from the
vinyl area.
The 45 RPM adapter allows you to play smaller vinyl records, known as singles.
1. Remove the 45 RPM adapter.
2. Insert the 45 RPM adapter onto the turntable.
3. Gently place the 45 rpm record into the turntable.
4. Place the turntable arm head on the vinyl and you can enjoy your vinyl.
E NGL I SH
8

FUNCTIONING

BLUETOOTH SETTINGS

ADAPTER 45 RPM