Quer KOM0916 Bedienungsanleitung Seite 18

Owner's manual
G-Sensor
When G-Sensor is on, DVR will protect and lock current
video once G-Sensor has been triggered by instant impacts
or shocks from traffic accident. To set the sensitivity of
G-Sensor, press MENU button and enter G-Sensor mode.
Available options are Off/ High/ Medium/ Low. Default
setting is [Medium].
Parking monitor
When Parking mode is on, DVR will turn on to start recor-
ding automatically if any external shocks to your car have
been detected. DVR will turn off automatically after 25
seconds of recording.
To set the sensitivity to trigger Parking monitor, press
Menu button twice, enter Parking mode then select be-
tween options High/ Medium/ Low and press OK button to
confirm your choice. Default setting is [Off]. When the func-
tion is turned on, [P] icon will be displayed on the screen.
Note: This function will not work if there is not enough
power supply from the built-in battery.
EN
USB mode
Connect DVR to the PC with the USB cable. Your computer
will prompt you about new found device. Select one of the
two options:
18