Connecting The Printer - Texas Instruments Pc-324 Bedienungsanleitung

3. If you have reached the end of a roll of
paper and a fold of paper will not
advance through the printer, tear away
the fold at the input side of the
mechanism.
4. Press the advance key [+] until all
paper is out of the printer.
5. Unroll about four inches of paper and
cut the end straight across.
6. Position the roll of paper behind
printer so that the paper unrolls
the bottom, loose end towards
pri nter.
7. Insert the end of the paper in the slot
on the back of the printer mechanism
until it meets resistance (See Figure 2).
8. Press the advance key to pull the paper
into the printer mechanism and past
the printhead. Continue to press the
advance key until the end of the paper
is completely through the printer.
9. Roll up the paper until it is inside the
paper storage compartment.
10. Guide the paper through the opening in
the cover and slide the cover
paper storage compartment.
Connecting
Locate your calculator's peripheral port,
shown in the Figure 3.
I. Be sure the
2. Plug the cable into the calculator.
3. Turn on the
Connecting the Cassette Interface
You can connect
cassette interface by using the following
the
steps :
from
the
Be sure the
1.
2. Connect
printer.
3. Connect
sette player.
4. Plug the printer
culator.
5. Turn on the
onto the
the Printer
calculator is turned off.
calculator.
both the printer and the
calculator is turned off.
the interface cable to the
the interface cable to the cas-
cable into the cal-
calculator.
7