Oregon Scientific WS906 Bedienungsanleitung

Orecon
SCIENTIFIC
Cordless Handheld Massager
with Heat
Model: WS906
USER MANUAL
INTRODUCTION
To fully benefit from the massage experience offered by this product,
user manual before first use and keep the manual for future reference.
SAFETY PRECAUTIONS
Individuals who are pregnant, fitted with pacemaker,
phlebitis and/or thrombosis, Or is at an increased risk of developing
to recent surgery or prolonged bed rest should consult their physician before using
the product.
DO not immerse the massager in water, use the product when taking shower
bathing, or in an environment which has dripping or splashing
spilled liquid on the product, turn off the product and dry it immediately
lint-free cloth
Do not subject the unit to excessive force, shock, dust, temperature
Do not cover the massager with anything, e.g. a blanket or clothing,
excessively heating the massager may eventually cause skin burn, fire hazard or
electricity leakage
Do not use the product on erupted, swollen, inflamed skin areas or when you have
a skin disease.
For personal hygiene reasons, wipe the product clean with a soft and slightly damp
cloth after each use.
If you are feeling drowsy, stop using the product and do not leave the product
operating when you are sleeping
It is not recommended to receive massage before
induce stimulating effect which may cause insomnia.
Do not use the product after drinking alcohol or when you are on medication
DO not prolong the massage on a single point Of your body. The product is designed
to massage in motions on an area of your body
Keep out of reach of children. Not suitable for children's use.
The appliance is not intended for use by persons with reduced physical, sensory
or mental capabilities, or lack Of expenence and knowledge,
been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
The massager is intended for external use only
Do not use the product on or near eye area, any highly sensitive areas or a body part
which has a poor blood circulation
Check the massager regularly for possible damage.
item is damaged in anyway or not functioning properly.
Do not attempt to repair the appliance yourself. Do not tamper with the unit's internal
components. This invalidates the warranty
DO not lift the massager by pulling the attaching power cord or use the power cord
as a handling unit.
Placement of the product on certain types of timber surface may bring damage to its
finish; Oregon Sclentific will not be responsible for which damage.
Consult the maintenance section on this manual for care
Remove dust regularly with a dry cloth. Accumulated dust poses a potential fire
hazard
The product is intended for indoor use only
Whendisposing,ensurethe productis collectedfor properwaste treatments.
Images shown In this manual may differ from the actual display.
The contents Of this manual may not be reproduced without the permission
manufacturer.
The technical specifications for this product and the contents of the user manual
are subject to change without notice
OVERVIEW
please read the
Heat massage surface
suffering from diabetes,
2 Massager head
blood clots due
Power I Vibration speed button: Turn on and select the intensity of vibration
3
4 Heat button:
5 Massager stand
or
6 High vibration speed indicator
liquid around. If you
Power on / Low vibration speed indicator light (White light)
7
with a soft,
8 Heat indicator light (Red light)
9 Battery indicator
or humidity
for low-battery)
while in use;
11DC} U SB p lug 10. DC 'ack (At the bottom Of the massager)
BATTERY CHARGING
The unit should be charged before the first use and when the battery indicator light
(green) is flashing (which Indicates the battery is low).
bedtime; the massager may
DO not operate the massager when charging
You can use the stand as the charging station (as illustrated in the Overview diagram
or charge the unit with the DC / USB cable alone
2 Insert the DC plug of the DC / USB cable to the slot at the bottom of the stand as
illustrated
unless they have
Stop using when you find the
3 Insert the USB plug of the DC / USB cable to a PC or laptop USB outlet.
Alternatively, you can use the AC/DC recharging adaptor to charge the unit from a
electrical
instructions
Of the
4 Flip to open the silicon cover of the DC slot. Place the massager
as illustrated
connected
Make sure the stand is sat on a flat and supportive surface when pressing the
unit to the charging station. If the indicator light does not appear, check the plugs and
the unit if it is placed the same as illustration
5 Charge the massager for 4 hours. Stop charging after the light turned off
which indicates the massager has finished charging.
Activate heat function
light (White light)
light (Steady white light for charging/ Flashing white
below.
socket outlet
in Overview Press the unit to the stand to make
properly. The battery indicator light will stay on.
in Overview.
IMPORTANT TO maintain
only charge the unit when the battery is low. Overcharging will adversely affects its
performance
USNG THE MASSAGER
1 This massager is not a medical or precise device, and is not intended to replace
professional medical care It is only intended
7 If you suffer from musculoskeletal disorder, consult a qualified physician
/ physiotherapist
2 DO not massage on a single point Of your body for too long The product is designed
to massage in motions on an area of your body.
TO massa e at low vibration
Press ower I Vibration
The white indicator light will appear under the massager head
TO turnOff, p ress Power I Vibration speed d) twice
9
To massage at high vibration
Press P ower IVibration s peed U twice. Two white lights i ndicators will a ppear.
TO turnOff, p ressPowerI Vibrationspeedd) again
10
11
1. The massager switches off every 30 minutes automatically
2 A fully-charged massager
HEAT FUNCTION
To activate heat function,
appear. It will take a few seconds for the heating surface to heat up.
TO turn Off, press Heat button
1. The heat function switches off every 15 minutes automatically.
light
2 A fully-charged massager can operate approximate
IMPORTANT Misapplication of the heat may cause serious injury to you skin. Be carefu
when using this function DO not use on sensitive or damaged
blood circulation. Do not allow children and incapacitate
MAINTENANCE
Ensure the unit is unplugged and cool before cleaning
For personal hygiene reasons, wipe the product clean firstly with a slightly damp cloth and
then with a soft dry cloth before and after each use This unit is not water proof. Submerging
it in water will cause damage to the electric components.Do not clean the unit with abrasive
or corrosive materials
Do not clean the massager with materials or tools that could cause damage, e.g. metallic or
sharp kitchen utensils or scouring pads
Do not switch on or operating the product when cleaning
Store in a dry and cool place
Do not expose the product to direct sunlight or store in a damp place
Always switch off after use
ABOUT OREGON SCIENTIFIC
Visit our website (wwworegonscientificnm) to learn more about Oregon Scientific
products. If you're In the US and would like to contact our Customer
directly, please visit: www2.oreqonscientific.com/service/support.asp.
inquiries, please visit: www2.oregonscientific.com/about/international.asp
EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientific,
(Model: WS906) is in compliance with EMC directive 2004/108/EC A copy Ofthe signed
and dated
Declaration of Conformity
Service
on the stand
sure the cable is
the battery life Of the massager, it is recommended
for leisure massaging
mode:
speed once.
mode•
can operate approximate 3 5 hours Of massaging
press Heat button once. A red indicator light will
again
4 5 hours Of heating
skin or on areas Of poor
persons use this function alone.
Care department
For international
declares that this Cordless Handheld Massager with Heat
is available on request via our Oregon Scientific Customer
that