Herunterladen Inhalt Inhalt Diese Seite drucken

Getting Started - Soundcore Nebula P1 Schnellstartanleitung

Vorschau anzeigen Andere Handbücher für Nebula P1:
Inhaltsverzeichnis
Volume Down
• Press to reduce volume.
Streaming Apps
• Press to open YouTube, Netflix, or Prime Video.
Auto Image Adjustment
• Press to enable auto image adjustment.
• Long press to perform manual adjustment.
Google Assistant
• Press and hold to talk to Google Assistant.
Confirm
• Press to select, pause, or resume.
Home
• Press to go to the home page.
Settings
• Press to go to settings.
Volume Up
• Press to increase volume.
Mute
• Press to mute / unmute the sound.

Getting Started

1. Position Your Projector
To achieve optimal projection quality, choose the appropriate projector
position and projection direction.
Projector Positioning:
Default: The projector is placed upright on a table or the floor. This is the most
common way to position the projector for quick setup and portability.
Ceiling: The projector is mounted upside down on the ceiling. The ceiling/
wall mount kit is required. When installing the projector in this manner, it is not
recommended to keep the speakers attached to the projector.
Projection Directions:
Front: The projector is positioned on the same side as the audience, projecting
directly onto the front of the screen.
Rear: The projector is placed behind a translucent screen, projecting the image
from the rear, with the audience positioned opposite the projector.
• After powering on the projector, press the Settings button on the
projector, then go to Advanced Settings > Projector Mode and select a
setting.
• There is no need to tilt the projector toward the screen, as this device
features auto focus and auto keystone correction.
• You can also install the projector on a tripod (sold separately).
• The distance between the projector lens and the screen determines the
projection screen size.
06
Ceiling Mode Setup:
Place the projector in its default position and project the image onto the ceiling.
Go to Settings > Projector > Keystone Correction, and enable Correction for
Ceiling Projection.
Recommended Distance Between Device and Projection Surface
60"
80"
1.59 m / 5.22 ft
2.13 m / 6.99ft
2.66 m / 8.73ft
100"
120"
150"
3.19 m / 10.47 ft
4.0 m / 13.12 ft
07
Inhaltsverzeichnis
loading

Diese Anleitung auch für:

D2431

Inhaltsverzeichnis