Back Panel - Rebel Comp Rb-4023 Bedienungsanleitung

2 X SCHUKO+BREAKER+USB+RJ11.pdf 1 18.07.2023 14:08:15

Back panel

Circuit breaker
AC Input
RB-4020 / RB-4021 / RB-4022
USB socket
Circuit breaker
AC Input
RB-4023 / RB-4024 / RB-4025
EN
Output
Output
RJ45 socket
Output
Output
10
LCD display (only models RB-4023 / RB-4024 / RB-4025)
Input voltage
Percentage
load
Battery capacity
Front panel (only models RB-4020 / RB-4021 / RB-4022)
Fault indicator
1. Inspection
Remove the UPS from its packaging and inspect it for damage that may have occurred
during shipping. If any damage is discovered, repack the unit and return it to the place of
purchase.
2. Charging
This unit is shipped from the factory with its internal battery fully charged, however, some
charge may be lost during shipping and the battery should be recharged prior to use. Turn
on the UPS, Plug the unit into an appropriate power supply and allow the UPS to charge
fully by leaving it plugged in for at least 6 hours with no load (no electrical devices such as
computers, monitors, etc.) connected.
6 hours
Output voltage
Working mode
Battery power
AC power
Power button
11 EN