Navitel R3 Bedienungsanleitung Seite 7

6 | USER MANUAL
EN
Stamp
G-sensor
Parking monitor
Battery
LCD OFF
GPS location
USB-connection *
* This function is available only in firmware version 1.7.62 and higher.
This function adds date stamp to the record.
If the vehicle is hit by something, the DVR will automatically lock the current video.
In shutdown state, if vibration is detected, the device will turn on automatically and start recording. The file will be
protected (locked).
Red indicator lights up when the device is plugged into an external power supply; as the battery is charging, the red
light becomes green.
The device can automatically shut off the screen to reduce power consumption; time interval can be set in the LCD
OFF menu.
Device supports built-in GPS chipset and GPS antenna, it can show longitude, latitude and other information on your
current location. Press GPS Status to check GPS dates.
When connecting the device to a PC using a USB cable, two connection options will appear:
1) Mass Storage: play, copy and delete files.
2) Record: standard mode.