Principle Of Operation - Maxtec Ultramaxo2 Betriebs- Und Bedienungsanleitung

PRINCIPLE OF OPERATION

The UltraMaxO Oxygen Analyzer measures oxygen concentration and flow using
2
ultrasound technology and measures pressure using a piezoresistive silicon pressure sensor.
WARNINGS
Indicates a potentially hazardous situation, if not avoided, could result in death or serious injury.
» Not for use in an MRI environment.
» Improper use of the UltraMaxO
treatment and/or patient harm. Follow the procedures outlined in this user manual.
» The UltraMaxO
2
DO NOT use the UltraMaxO
DO NOT use the UltraMaxO
when flowing at rates lower than its optimal performance as specified by the concentrator
manufacturer; generally 4 LPM or less on concentrators that have a maximum flow of 10
LPM, and 1 LPM or less on concentrators that have a maximum flow of 5 LPM.
» Not for use in anesthesia applications or for measuring oxygen concentration from any sources
other than conventional oxygen concentrators.
» Not for use with inhalation agents. Operating the UltraMaxO
environments may result in fire or explosion.
» Not suitable for use in the presence of flammable anesthetic mixtures.
» Oxygen rapidly accelerates combustion.
checking oxygen concentrators.
Users must become thoroughly familiar with the information contained in this Operation
Manual before use. Strict adherence to the operating instructions is necessary for safe,
effective product performance. This product will perform only as designed if operated in
accordance with the manufacturer's operating instructions.
» Use only genuine Maxtec accessories. Failure to do so may seriously impair the performance
of the UltraMaxO
an authorized Maxtec service representative could cause the product to fail to perform
as designed.
» Use of the UltraMaxO
» If the UltraMaxO
remove the batteries and let the device dry completely. When dry, replace the batteries
and check for proper operation.
DO NOT autoclave or expose the UltraMaxO
DO NOT use ethylene oxide sterilization.
DO NOT expose the UltraMaxO
DO NOT expose the UltraMaxO
pressure above 50 psi could cause leaks in the device which may adversely affect
performance in flow and pressure readings.
II
!
can cause inaccurate oxygen readings leading to improper
2
is for checking oxygen concentrators only.
for continuous oxygen monitoring.
2
to measure the oxygen concentration of a concentrator
2
. Repair or alteration of the UltraMaxO
2
near devices that generate electrical fields may cause erratic readings.
2
is ever exposed to liquids from spills or immersion, immediately
2
2
2
866.4.Maxtec www.maxtec.com
866.4.Maxtec
Do not smoke while using the UltraMaxO
by anyone other than
2
to high temperatures (>60°C).
2
to irradiation, vacuum, steam, or harsh chemicals.
to pressure greater than 50 psi. Exposure to
www.maxtecinc.com
in flammable or explosive
2
for
2