Miele A 812 Gebrauchsanweisung Seite 35

Injector manifolds
without tubular fil-
ter
If the injector manifold has not been fitted with an A 800 tubular filter
or the manifold cannot accommodate a tubular filter, a borosilicate FP
20 filter plate can be inserted into the A 813 adapter.
To do this, unscrew the top part of the adapter.

Insert a filter plate  into the bottom part.

Insert the silicone adapter for filter plates  into the bottom part.

Screw the top part and bottom part back together.

Filter plates must be replaced approx. every 2 weeks or after 20
cycles have been run.
Do not insert a filter plate into the adapter if the injector manifold
has been fitted with an A 800 tubular filter.
en - Areas of application
35