Prunus J-725C Bedienungsanleitung

PRUNUS J-725C Multifunctional
Thank you for purchasing the PRUNUS J-725C radio/mp3
from the radio please read this manual carefully before using it and take special notice of
the section on precautions.
Precautions
Please charge this product under safe environment, do not charge under unstable voltage or
near dangerous goods;
Please do not use this product near water or put it into liquid;
Please do not use this product near the environment over 40 degrees Celsius;
Please do not throw this product into fire, may have risk to cause explosion.
Functional components
LEO
(j) Power switch
@ Number buttons
@Volume knob
@ DC5Vcharging/AUX injack
(9 Charging indicator/LED flashlight
@ USBport
(? ) Earphone output
@TF card slots (TFI/TF2)
@ Previous/Rewind
00 ) Play/Pause/Scan and memory radio channels
Power Supply
As the system takes time to react, please wait for 3 seconds after pushing the power
switch, then the radio will turn on.
1.Charging method: Plug the big end of the charging cable into the USBJack of computer or
power bank, and plug the small end into the <@DC 5V charging/AUX in Jack> of this unit. (If an
adapter is important for you, please send message
in 1 working day) , to get PRUNUSquality charger with indicator in 60%
discount.)
2.Charging indicator: When charging, the <@Charging indicator/LED flashlight> will light on
with REDlight (the charging time is 3-5 hours); when it is fully charged, the charging indicator
will turn from RED to GREEN.
Digital MP3 Clock Radio User Manual
player. In order to get the best
O)
MODE
10
LED
(9
3
(t)
@ Next/Fast-forward
@ Repeat
@ Mode switch: Among USB/TFI /TF2/AUX
/FM/Time
@Telescopic aerial
09 Clock/Previous folder/Number
(jb Alarm clock/Next folder/Number
@Alarm clock cancel/Number
LEDflashlight switch
"PRUNUS Charger" to E-mail:wanwa-
- EN -
Please Note:
•Please use standard DC5V/500-2000mAh charger (or other devices can supply this type of-
power) to charge it, or it may damage the radio;
• To ensure the battery has longer using life, you'd better reduce the long continuous charging.
Radio reception
1. Push switch> to the power-on position.
2. Press <@Mode switch> to switch to FM mode.
3. How to search and store channels?
1) Automatic Search : Long press <@Play/Pause/Scan and memory radio channels > for 3
seconds to automatically search, store and number the channels around you. Please note that
the order of the channels cannot be changed manually;
2) Manual Search: Press<@Number buttons> to search and select your favorite channels. For
example, pressing 8 + 9 + 8, will Jump to 89.8MHZ channels.
4. How to select the stored
1) Short press<@Previous/Rewind>or
listen to;
2) Pressnumber buttons to select one specific channel (For example, continuously press buttons
1+5 to select the 15th radio channel, but if the total numbers of the radio channels are not more
than 15, it will play the current radio channel).
5. Turn the <@volume knob> to adjust the volume.
G)
6. Press<@Play/Pause/Scan and memory radio channels> to pause the current playing; press
this button again will resume the playing.
Note:
When tuning to the FMstations, extend the <@Telescopic aerial> and adjust the position of
the aerial for the best reception;
•In order to get better reception, when using the radio indoors, please approach it to the
window and do your best to keep it away from the electronic devices ( such as computers, TVs,
refrigerators, mobile phones, etc ).
1 button
2 button
Time Function
3 button
1. How to set time?
1) Press<@Mode switch> to change to time mode;
2) Long press<09Clock/Previousfolder/Number 1 button >, the screennumbers will flicker for 11
seconds, you need to set the time in this period;
3) Press number buttons to set the time (For example, continuously press buttons 1+5+5+0, will
set time 15:50), then the screen numbers stop flickering, and show the time you set.
2. How to set alarm
1) In time mode, long press
icon appears and the screen numbers start flickering, you need to set the alarm clock time in
11 seconds;
2) Press number buttons to set the alarm clock time (For example, continuously press buttons
1+0+3+0, will set the alarm clock time 10:30), when the setting finished, the screen numbers stop
flickering , the alarm clock icon
channels?
clock?
clock/Next folder/Number
will appear in the clock mode ( Attention : Once you have
- EN -
to selectthe channel you want to
2 button>, the alarm clock