Initial Setup; Turning On The Product - Parkside Performance Pbr 36 A1 Schnellstartanleitung

˜ Quick Start Guide
This information sheet is an integral part of the operating instructions. Keep it in a safe place together with
the instruction manual. If you give the product to third parties, all documentation should be passed on to
them as well. Before using the product, read the instruction manual and pay particular attention to the
safety notes it contains.
A

Initial setup

B

Turning on the product

LED indicator
3) Connecting to playback device via Bluetooth®
Press the button to enable or disable a Bluetooth connection.
ACCEPT the product identification "PBL 40 A1" on the playback device.
6 GB/IE
1) Insert the 18V DC plug of the power
adapter into the DC socket of speaker
charging port. And then plug the AC power
adapter into mains outlet.
2) Alternatively, you can insert 12V/ 20V
battery into battery socket of speaker to power
up this speaker.
Press the ON/OFF button to enter display
interface, and enter into DAB mode to auto start searching
broadcast DAB+ station.
Press ON/OFF button again to turn into standby mode and
display will turn OFF.