Blade BR5 RACING WHEEL Bedienungsanleitung Seite 19

CONNECTION WITH PC
NOTE: In X-Input mode, the LED lights up orange; in D-Input mode, the LED lights up purple.
1. Disconnect the USB dongle.
2. Connect the pedals to the base of the wheel.
3. Connect the gear shifter to the base of the wheel (if you want to use sequential gear shifting).
4. Connect the wheel to the PC directly (without the USB dongle).
The connection is now complete and you can use the wheel.
P.S.1: Check if the game requires X-Input or D-Input to play.
P.S.2: X-Input is the default connection mode.
CHANGE CONNECTION MODE PC
1. Press and hold the PS/MODE button for 2 seconds. The orange LED will start flashing.
2. The LED will change to purple when the connection mode switch is complete.
TESTING THE WHEEL ON PC
Go to Device Properties in Windows to test button functions and calibrate the wheel and pedal axes.
SENSITIVITY ADJUSTMENT
1. Press SHARE + R3 for 5 seconds to enter adjustment mode.
2. Press the D-PAD up or down to select the dead zone angle between S-M-L.
3. Factory default level is S.
4. LED flashing frequency indicates selected level:
• Level S: 1 flash/second.
• Level M: 3 flashes/second.
• Level L: 6 flashes/second.
5. Press the X button to save the selected level and exit adjustment mode.
TROUBLESHOOTING
• If the connection between the controller and the wheel fails, disconnect everything and reconnect following the platform
instructions.
• If the wheel does not work or respond, turn off the console or PC, disconnect everything, and reconnect following the
platform instructions.
PRECAUTIONS
• Please read this manual carefully before using the wheel.
• Do not strike or drop the wheel.
• Do not disassemble, modify, or attempt to repair the wheel yourself.
• Do not store the wheel in humid, hot, or greasy environments.
19