Programming Instructions - Blade Br5 Racing Wheel Bedienungsanleitung

FUNCTION BUTTON PROGRAMMING
FUNCTION BUTTON INFORMATION
Action buttons: /1/X, /3/B,
Buttons that can be reprogrammed:
L-Wing(L1/5/LB/L),R-Wing(R1/6/RB/R), Accelerator Pedal(X/2/RT),Brake Pedal( /1/LT), L3/11/SL, R3/12/SR

PROGRAMMING INSTRUCTIONS

1. Press Share + Options and hold for 3 seconds until the LED lights up white.
2. Press the button you want to reprogram, the white LED will start flashing.
3. Press the action you want to assign. The white LED will turn off, confirming programming.
RESTORE ALL BUTTONS TO FACTORY SETTINGS
1. Press Share + Options and hold for 3 seconds until the LED lights up white.
2. Press and hold the Options button for 4 seconds. The white LED will turn off, confirming that the buttons have been
restored to factory settings.
NOTE: Button programming has a memory function (button settings are not deleted when the wheel is powered off).
HOW TO CONNECT THE BR5
CONNECTION WITH PS5™
NOTE: The controller and console must be turned off before connecting the steering wheel.
NOTE II: When connected to PS5, the LED lights up blue.
NOTE III: Keep the USB dongle connected for correct operation.
1. Turn on the PS5 console from the console's power button.
2. Connect the pedals to the base of the wheel.
3. Connect the gear shifter to the base of the wheel (if you want to use sequential gear shifting).
4. Connect the wheel to the console.
5. Connect the original PS5 DualSense controller (turned off) to the wheel base, using the cable included with your console
or a compatible data transfer cable.
6. After completing these steps, the connection will be established, and you can start using the wheel.
Important: Make sure the LED is lit blue when using the wheel on PS5.
/4/Y, X/2/A, L1/5/LB/L, L2/7/LT/ZL, R1/6/RB/R, R2/8/RT/ZR.
18