Charging The Battery - Blaupunkt Rlr701 Bedienungsanleitung

RLR701
Your products is designed a manufactured with high quality
materials and components, which can be recycled and reused.
Technical data
Rated voltage: DC 3.7V Rated power:3W
Charging lnput: 5V 700mA
1. Protective cover
2. Blades
3. Blade cover
4. Lint tank
5. Body
6. Lint roller

CHARGING THE BATTERY

1. Make sure that the remover is switched off before connecting
the charger.
2. Charging is done via a USB-C cable, which should be plugged
into the USB-C charging port on the device.
3. The device has a charging indicator light located next to the
power switch: Flashing red – the battery is low or currently
charging, Flashing blue – the battery is fully charged, Blue light
(no ashing) – the remover is in use.
4. Once the device is fully charged ( ashing blue light), unplug the
USB-C cable and remove the charger from the socket.
USE OF LINT REMOVER
WARNING: The lint remover should not be used on buttons, zips,
stripes, sticky labels, labels, seams, etc. It may cause the
deformation of the remover or the garment.
WARNING: Before attempting to clean the fabric, try to operate the
lint remover in an unobstructed area of the fabric.
1. Remove the protective cover (1).
2. Turn on the lint remover. Move around the fabric. Regularly
empty the lint tank (6).
3. To use the lint roller (6), pull the lower part of the body (5) and
slide out the lint roller.
7. USB-C charging port
8. On/Off switch
9. Charging indicator light
10. USB charging cable
11. Cleaning brush
3