Herunterladen Inhalt Inhalt Diese Seite drucken

Philips GC7600 Bedienungsanleitung Seite 10

Vorschau ausblenden Andere Handbücher für GC7600:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

ENGLIsh
10
To activate the ECO mode, press the ECO button. The light in the
1
ECO button goes on.
To switch back to the 'OptimalTemp' setting, press the ECO button again.
2
For the shortest ironing time, we advise you to use the 'OptimalTemp' setting.
Safety auto-off (specific types only)
The safety auto-off function automatically switches off the appliance if it has
not been used for 5 minutes, to save energy.
IMPORTANT: Replacing the ANTI-CALC cartridge
ANTI-CALC replacement light
It is very important that you replace the ANTI-CALC cartridge when
the ANTI-CALC cartridge replacement light starts flashing and the
appliance starts beeping.
Note: The cartridge lasts 3 months on average, but this depends on the
hardness of the water you use and on how many hours you iron.
The ANTI-CALC replacement light starts flashing and the appliance starts
-
beeping to indicate that the ANTI-CALC cartridge needs to be replaced.
You can still continue steam ironing for 15-30 min. (depending on
-
the hardness of the water used) when the ANTI-CALC replacement
light flashes and the appliance beeps. However, the steam output will
diminish and ultimately the steam generator stops producing steam to
prevent scale build-up that would permanently damage your appliance.
To let the appliance produce steam again, you have to replace the
-
ANTI-CALC cartridge. If you do not want to replace the ANTI-CALC
cartridge, you have to use demineralised water or descaled water from
the IronCare. In that case, you need to leave the exhausted cartridge in
the compartment.
Replacing the ANTI-CALC cartridge
1
Switch off the appliance and let it cool down.
Follow the steps in chapter 'Before first use - Placing the
2
ANTI-CALC cartridge'.
Cleaning
To properly maintain your appliance, clean it regularly.
1
Clean the appliance with a moist cloth.
To easily and effectively remove stains, let the soleplate heat up and
2
move the iron over a moist cloth.
Tip: Clean the soleplate regularly to ensure smooth gliding.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis