Storage; Maintenance; Transport; Possible Cause - Meec Tools 031307 Bedienungsanleitung

4

Storage

● If the product is not going to be used for a long period
of time, remove the battery, keep the product in a
clean and dry area, where children and pets do not
have access to it.
● Keep the product in a dry area, protected from direct
sunlight and wet conditions.
● Do not keep the product stored where the ambient
temperature is below 0°C or above 40°C.
5

Maintenance

Caution! The power tool must only be serviced by
qualified personnel using identical spare parts. This will
ensure that the power tool remains safe to use.
● Clean the product with a dry cloth if necessary.
● Use compressed air or a brush to clean hard to get to
areas.
6

Transport

● Let the product come to a complete stop and remove
the battery before you move the product.
● Let the product become completely cool before you
move the product.
● Use the handle when you lift or move the product.
7 Storage
● If the product is not going to be used for a long period
of time, keep the product in a clean and dry area,
where children and pets do not have access to it.
● Keep the product in a dry area, protected from direct
sunlight and wet conditions.
8 Troubleshooting
Problem
The product does not start or the
performance is low.
The product stops during use.

Possible cause

The power of the battery is low.
The overload protection is activated.
Task
Charge the battery.
Stop and start the product again.
EN
SV
NO
DA
PL
DE
FI
FR
NL
5