BOXIO BOX-WF-10 Montageanleitung Und Benutzerhandbuch Seite 8

• Note operating temperature: The filter works reliably between 0 -32°C.
Temperatures outside this range can damage the filter membrane.
• Carry out regular maintenance: Follow the instructions for backwashing and
storage. Replace the filter pads regularly to ensure long -term effectiveness.
7. Cleaning and maintenance
• After each use: Blow the remaining water out of the filter to avoid
blockages and bacteria formation.
• Backwash regularly: Connect a bottle or bladder of clean water to the
mouthpiece side of the filter an d force the water through the filter to
backwash it.
• Keep clean: Make sure that the outside of the filter remains clean and that
no deposits form.
• Storage: Store the filter in a cool, dry and well-ventilated place.
• The water filter contains replaceable activated carbon and PP cotton filter
pads that remove tastes, odors and particles and protect the filter
membrane. To ensure long-term high filter performance and hygienic
safety, dispose of the filter pads after each continuous period of use (e.g.
after a vacation or a longer tour) and replace them with new ones before
the next use.
8. Troubleshooting
Mistake
The flow rate is too
low
9. Warranty and Service
Our products come with a two-year warranty from the date of purchase. This warranty
covers all manufacturing defects and defects in materials. If your WATER FILTER
develops a defect within this period, please contact us immediately at support@boxio-
shop.de so that we can correct the defect .
Please note that the warranty does not cover damage caused by mishandling, misuse or
neglected maintenance.
Disclaimer: These instructions have been partially machine translated. In case of
doubt, the English original prevails.
Revision date March 24, 2025
Caused
Air bubbles could have
formed in the
membrane.
One of the filters is
clogged.
Solution
Blow air into the mouthpiece to
remove it.
Replace filter pads and/or
backwash membrane filters.