KONUS KONUSPOT-65 Kurzanleitung

MOUNTING:
1) Screw the tripod (I) onto the spotting scope,
2) Lifting the ring around the black central column (2); near the
three legs, allows fluid movement in regulating the height of the tri-
pod.
3) To make an approximate sighting of the instrument; adjust the
micrometric screw (3) that regulates the sight and free the lateral
ring (4) that allows the telescope to rotate on its central axis.
4) To focus, rotate the metal ring (5) until you have obtained the
clearest image possible..
5) ZOOM: rotate the metal ring (6) in order to vary the magnifica-
tion from 15x to 45x. Increased magnification
of the focus.
6) Choice of magnification; with an increased magnification there
is a decrease in luminosity and a reduction of the magnified area.
Always begin observation at a low magnification and increasestea-
dily until the best magnification, compatible with the observed
subject and its enviroment is achieved
TECHNICAL CHARACTERISTICS:
MODEL 7116 PRISM SPOTTING
FROM 1 TO 45X • Ø65 MM OBJECTIVE • WITH TABLE TRIPOD.
ADAPTOR FOR PHOTOGRAPHY
To transform your spotting scope into a powerful telephoto lens
suitable for use with most reflex cameras, you will need:
I) a photo adaptor enclosed
2) T/2 ring (Optional - varies according to the make of camera)
BRAND PHOTOCAMERA
CANON
MINOLTA
NIKON
OLYMPUS
PENTAX KIM -RICOH-CHINON
YASHICA-CONTAX
SP-VITE
PRACTIKA
MINOLTA MAXXUM
CANON eos
MOUNTING
I. Remove the rubber surround from the ocular (7). 2. Screw the
photography adaptor (C) onto the ocular. 3. Screw the T/2 ring (B)
onto the photography adaptor.4. Screw the T/2 ring onto the body
of the camera (A) as though it were a normal objective. 5. Rotate
the zoom ring (6) until you have reached the required degree of
magnification. 6. While looking through the view finder of the
camera, rotate the focusing ring (5) until you have obtained a sharp
and clear image of the object under observation.
Thisproductis guaranteed againstmanufacturing defects for a periodof oneyear.Theguarantee doesnot coverdefects cau-
sedby: • incorrectuseof the instrument• accidentalknocksand/orfalls • normalwear andtearof parts•• mishandling and
or undue force • repairs effected by unauthorised persons.
Completethe guaranteeby filling in the model and the date of purchasein the spaceprovided.
Attach the till receipt to the guarantee.
If it is necessary t o returnthe instrument f or repair/replacement, pack it carefullyand sendit carriagepaid hometo the distri-
butor listed below
Thegoodswill be replacedor repairedat the discretionof the distributor.In the interests of a moreefficientservice,please
enclosea lettergivingyour full address andtelephonenumberandgivingfull detailsof the defects of the inStrument.
MODEL
#7116 KONUSPOT-65
requires adjustment
SCOPE • MAGNIFICATION
COD. T/2
1583
1 584
1585
1586
1587
1588
1591
-1594
1596
1597
GUARANTEE
CODE No
1
3
2
You have now set everything in place for photography.
ADVICE FOR PHOTOGRAPHY:
•Never aim the instrument at the sun. Never look through the
instrument at the sun.• With some
lengthof exposureis requiredbefore it is possibleto take a photo-
graph.On zoom models,rememberthat a largerdegreeof magni-
fication results in a greater degree of luminosity and therefore
requires a longer exposure time.
MAINTENANCE:
• Storeyour equipmentin a safe,dry place,ensuringthat it is cove-
redand protectedfrom dust. • Avoid touching the lenseswith dirty
fingersasthe salt and moisturecontained in the skin could dama-
ge the lenses.• Do not clean the optic parts if it is not absolutely
necessaryto do so, as they might suffer damage.• For cleaning of
the lenses, we recommend a soft clothan
ned dirt, use a soft cloth, without any artificial fibres, soaked with
alcohol or ether.
KONUS
DATE OF PURCHASE
7
5
4
c
models of camera a certain
the case of moré ingrai-