ACHATE CLEANER PRO Bedienungsanleitung Seite 9

WALL CHARGER BASE ASSEMBLY
• Keep a distance of at least 1000 mm from the floor when mounting the
charger to the wall.
EMPTY THE DUST CONTAINER AND DUST FILTER
• Note: Press the dust container button to empty the container.
CLEAN THE DUST CONTAINER AND DUST FILTER
• Note: To ensure the proper cleaning efficiency of the vacuum cleaner,
clean the dust cup and filter after five uses.
1. Press the dust cup button and remove the dust cup as shown in the
illustration. Remove the dust cup from the vacuum cleaner.
2. Remove the HEPA filter from the HEPA cover and wash the HEPA filter and
HEPA cover with cold water. Reinstall them on the vacuum cleaner when
they are completely dry. Do not dry them with a hair dryer.
3. Rinse both the HEPA filter and housing with cold water. Place the parts
back in the vacuum cleaner when they are completely dry. Do not use a
hair dryer to dry them.
16
CLEAN THE FLOOR BRUSH
• Note: Make sure the vacuum cleaner is turned off when cleaning the floor
brush. Remove the floor brush as shown in the illustration.
1. Press the floor brush button as shown in the illustration.
2. Rotate the floor brush cover and pull out the roller
3. Rotate the floor brush cover and pull out the roller
PRECAUTION
• The suction opening must not be blocked, otherwise the vacuum cleaner
will be protected from overheating.
NOTE
• The dust filter is washable. The HEPA filter should be replaced every 3 to 6
months to ensure the proper cleaning efficiency of the machine.
17