Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Field of application:
The devices are suited only for distributing radio and television signals in the
house! If the device is used for other purposes, no warranty is given!
The illustration shows an application example of the distribution in star (1) and
tree structure (2).
Equipotential bonding and Mounting:
To avoid dangerous overvoltages (attention: risk of fire/death), the devices
must be connected to the equipotential bonding according to EN 60728-11.
Use the equipotential bonding connection attached to the device (3).
To connect the outer conductor of the coaxial cable to the equipotential
bonding, use e.g. earth connection blocks CFA 7-01 at the input and output
of the amplifier (4).
Use the mounting screws included in the delivery and the mounting holes
of the devices (5).
5
3
Combined input VHF/UHF
Level adjustments:
The input levels for UHF, VHF and FM can
be individually adjusted with the three
attenuators.
Output
Adjustable attenuator (FM)
Adjustable attenuator (VHF)
Adjustable attenuator (UHF)
FM input
RF Installation:
3
Connect the VHF/UHF input of the amplifier to an
antenna which is suitabel for DVB-T. Connect the FM
input of the amplifier to a FM antenna. Connect the
output of the amplifier to the antenna sockets or the
taps used.
Use highly shielded coaxial cables with F connectors.
Suited cables and connectors can be found in the
current AXING catalogue or at www.axing.com.
4
1
2
Werbung
