POWERCOLOR Radeon AI PRO R9700 Installationsanleitung Seite 5

Quick Installation Guide
System Requirements
1. Expansion Slot: Motherboard with one or more
PCI Express x16 slot.
2. Display: Monitor or other display device with
compatible connectivity to the output interface of
your graphics card.
3. Power requirement: Power Consumption differs
by model.
(For additional support details, please refer to:
www.powercolor.com/ to calculate your minimum
system power requirement.)
4. Operation System: Linux©/Windows
Windows 11
®
(For additional support details, please refer to:
https://www.amd.com/en/support)
Hardware Installation
Turn off computer, switch off the PSU, and
1
disconnect the power cord.
2
Open the case.
Remove any existing graphics card (if applicable)
3
or PCIE slot covers.
Insert the Graphics Card into the PCIE slot.
4
Make sure seating is secured with the PCIE
5
locking mechanism in place.
6 Secure graphics card to the PCIE bracket with
thumbscrew.
7 Plug in the required external PCIE power
connectors (if applicable) from the appropriate
PC Power Supply Unit.
8
Close the case.
9 Connect the display cable into the corresponding
GPU display output port.
10 Power on System, booting to OS. (Removing all
drivers for your previous card and performing a
clean install of the new drivers is recommended.)
Driver Installation
1. Please download the driver.
2. Install the driver based on your product.
3. Execute the driver and follow the instruction.
Driver Installation Link
Driver for PowerColor
https://www.powercolor.com/download22.htm#sort_1
Driver and Support for AMD
https://www.amd.com/en/support
Warning Warning
12VHPWR Adapter Cable Usage
Do not bend the wires within 25 mm to 40 mm
from the connector. Keep this section straight to
prevent potential damage.
10/
®
Ensure the 12VHPWR adapter cable is fully
inserted before use. Visible yellow pins indicate
an incomplete installation.
Do not use excessive force or bend the connector during
installation, as this may damage the connector and pins.
Use 2 Individual PCIe Cables
To ensure stable power delivery and avoid potential
issues, always connect two separate PCIe cables
directly from the power supply to the card, as
illustrated below:
A AMD Radeon Setting Software Installation
To take full advantage of the features and
capabilities of your Radeon Graphics products,
installing the most up-to-date Radeon Software is
recommended.
(For more support, visit:
https://www.amd.com/en/support/driverhelp)
*Please make sure you choose "Full Install" when
installing the driver to enjoy full function of the
software.
5
25mm to 40mm
Fully Inserted NOT Fully Inserted
Correct: Two individual PCIe cables from the PSU.
Incorrect: Shared or daisy-chained PCIe cables.