Lorelli Trinity Bedienungsanleitung Seite 12

7. Image settings
8. Human detection and tracking - on/off
9. Privacy protection
10. Alarm management
11. Recordings management
12. Cloud settings
13. ONVIF settings
14. Software version
15. Removal of device from the app
FREQUENTLY ASKED
Q: The device cannot be visualised properly?
A: Ensure that everything is okay with the network, you can place the device closer to the
router. If this does not work, it is recommended to restart the device and add it again.
Q: Why is the device still in the list of devices after restarting?
A: Restarting the device only resets the network configuration of the camera, but cannot
change the configuration in the app, you need to delete the camera from the app.
Q: How can I connect
A: First remove and restart the device in the app and then reconfigure the device via the
app.
Q: Why does the device not recognize the MicroSD card?
A: It is recommended
Ensure that the card is accessible, and the format is FAT32. If the Wi-Fi signal is poor, the
card also may not be recognized.
Q: Why can't I receive notifications on my mobile phone app?
A: Please make sure that the application is running on the phone, that the reminder
function in question
confirmation in the mobile phone system are open.
Q What is the meaning of the light indications of the device?
A: Flashing red light: wait for network connection (slow) network connection (fast)
Steady blue light: the camera is working properly. Steady red light: The camera is not
working
TECHNICAL SPECIFICATIONS
Monitoring via IOS/Android
Resolution: 1920 (B)x 1080 (B)
Lens: mm
Sensor: 112.9" 2MegapixeI CMOS
Compression: H .264
Wireless connectivity:
Supported OS: iOS 9, Android 5 or later
Trigger an alarm: Smart detection Ofmotion/sound
Selection of motion zone: yes
Infrared night mode - night visibility up to 10m
Two-way audio: yes
Maximum number
MicroSD card slot (max 128GB, not included), cloud storage (not included)
Operating and storage temperature:
Slope: -150—400; Rotation around the axis: 0 —3500
Dimensions: 73X78x121
Weight: 250 g (camera + accessories)
USB power adapter - mains input voltage: AC 100—240V;Output voltage: DC 5.0V/ IP Class:
check
QUESTIONS
the camera
to insert the card after disconnecting from the power source.
is open, and that the message
phone or tablet via the CloudEdge
2.4 G WI-Fl (IEEE802. Illb/g/n)
of users: 6
- 20 oc to 40 'C
mm
to another router?
notification and authorization
app with email registration