The use of the WISY top ring is important for a reliable and safe
putting on of the housing lid. The top ring is placed either on the
filter housing or on the extension pipe, if this is in use. The top ring
has to be screwed also with three screws.
For larger depths, up to two further extension pipes can be
assembled (accessories).
Cleaning the filter insert
Remove the filter insert with the lifting handle provided (standard
length 30 cm)
Set down the
lifting handle ...
We recommend cleaning every Quarter. Cleaning at shorter
intervals may be necessary in unfavourable cases; in favourable
cases after six months, but then clean the filter insert in any case.
Experience has shown that cleaning in a dishwasher is always
successful, provided the filter insert is placed in the same position
in the dishwasher as it is in the WFF. Cleaning by hand is also
possible with a small brush, hot water and a normal dishwashing
liquid. For tenacious soiling of the filter mesh (e.g. through
industrial pollution in the neighbourhood) the use of a high
pressure cleaner will lead to success!
... turn clockwise
under the lugs ...
14
... and remove