Setting Up The Sunshade; Fitting The Winch Handle - Sun Garden Easy Sun PARASOL JUNIOR Bedienungsanleitung

6.0 Setting up the Sunshade

Caution: Danger of accident!
• It is easier if you can get a second person
to help when setting up the sunshade.
• Ensure that the Parasol Junior base or
Bottom pole is secure and stable before
setting up the sunshade.
Place the sunshade with its stand tube
into the stand tube seat of the Parasol
Junior base or Bottom pole*.
Push the stand tube in as far as the
stop in the stand tube seat.
Turn the sunshade backwards and
forwards until the floor sleeve engages
in the stand tube seat (centred).
Note
If the floor sleeve has engaged
correctly, the sunshade can no
longer be turned.
Clamp the sunshade by tightening the union
nut in the stand tube seat.
* The Bottom pole / Parasol base is NOT included in delivery with the sunshade (optional extra).

7.0 Fitting the winch handle

Loosen grub screw with Allen key
(SW 4 mm / 0.15´´).
Place the winch handle in the location hole
so that the recess in the handle is facing
the grub screw.
Tighten grub screw.
When tightening, ensure that the grub screw
engages exactly into the recess.
Note
Overtightening of the grub screw
causes damage to the Allen screw.
Issue: 20.02.2006
S
ETTING UP THE SUNSHADE
Stand tube
Stand tube
seat
tighten
Securing the sunshade by
tightening the union nut
Winch handle
Recess
Location hole
Grub screw
Allen key (SW 4 mm / 0.15´´)
loosen
Page 9